CinemaScope was an anamorphic lens series created by the president of 20th Century-Fox in 1953. It was used from 1953 to 1967 for shooting wide screen movies, marking the beginning of the modern anamorphic format in both principal photography and movie projection. The anamorphic lenses theoretically allowed the process to create an image of up to a 2.66:1 aspect ratio, almost twice as wide as the previously ubiquitous Academy format's 1.37:1 ratio. Although the CinemaScope lens system was quickly made obsolete by new technological developments, primarily advanced by Panavision, the anamorphic format has continued to this day. In film-industry jargon, the shortened form, 'Scope, is still widely used by both filmmakers and projectionists, although today it generally refers to any 2.35:1 or 2.39:1 presentation or, sometimes, the use of anamorphic lensing or projection in particular. Bausch & Lomb won a 1954 Oscar for its development of the CinemaScope lens.


A French inventor named Henri Chrétien developed and patented a new film process that he called Anamorphoscope in 1926. It was this process that would later form the basis for CinemaScope. Chrétien's process was based on lenses that employed an optical trick which produced an image twice as wide as that produced with conventional lenses, using an optical system called hypergonar, compressing (at shoot time) and dilating (at projection time) the image laterally.[1] Later, in New York, a premiere of Chrétien's new process impressed the major Hollywood film studios of the time, who were eager to win back lost audiences from television’s allure.[2]

Twentieth Century-Fox bought the rights of the Anamorphoscope. However, the format needed more development before it would be ready to use. The first of Chrétien's lenses were quickly transported to Hollywood where they were further analyzed. From this analysis the basis of CinemaScope was formed. Twentieth Century-Fox's pre-production of The Robe was halted so that the film could be changed to a CinemaScope production, what Fox president Spyros Skouras called the future of filmmaking. With the introduction of CinemaScope, Fox and other companies would be able to re-assert its distinction from its new competitor — television.[2]

The initial implementation of that which would eventually be called CinemaScope employed the best of the so-called "Chrétien-formula" anamorphoscopes. As these adapter lenses proved to have significant optical and operational defects ("swale" and loss-of-squeeze at close camera-to subject distances, plus the requirement of two camera assistants), Bausch & Lomb, Fox's prime contractor for the production of these lenses, initially produced an improved "Chrétien-formula" adapter lens design (CinemaScope Adapter Type I), and subsequently produced a dramatically improved and patented "Bausch & Lomb formula" adapter lens design (CinemaScope Adapter Type II), and, finally, produced "Bausch & Lomb formula" "combined" lens designs, which incorporated both the "prime" lens and the anamorphic lens in one unit (initially in 35, 40, 50, 75, 100 and 152 focal lengths, and, later, including a 25mm focal length). These "combined" lenses continue to be used to this day, especially in special effects units, although other manufacturers' lenses are often preferred for so-called "production" applications on account of their significantly lighter weight, or lower distortion, or a combination of both characteristics.

Early implementationsEdit

The original expectation was that CinemaScope would use a separate film for sound (see Audio below) thus enabling the full "silent" 1.33:1 aperture to be available for the picture with a 2:1 anamorphic sqeeze applied that would allow an aspect ratio of 2.66:1. When, however, it was found possible to add magnetic stripes to the film to produce a composite picture/sound print, the ratio of the image was reduced to 2.55:1. This reduction was kept to a minimum by reducing the width of the normal KS perforations so that they were nearly square, thus, the CinemaScope, or CS perf was born, known colloquially as "fox-holes". Later still an optical soundtrack was added reducing the aspect ratio further to 2.35:1. This change also meant a shift in the optical centre of the image.

In order to better hide so-called "negative assembly" splices, the ratio of the image was later changed by others to 2.39:1 and, finally, to 2.40:1, although all professional cameras are capable of shooting 2.55:1 (special 'Scope aperture plate) or 2.66:1 (standard "Full"/"Silent" aperture plate, preferred by many producers and all optical houses), and 2.35:1 or 2.39:1 or 2.40:1 is simply a hard-matted version of the others.


Fox officials were keen that the sound of their new wide-screen film format should be as impressive as the picture, and that meant it should include true stereophonic sound. Previously stereo sound in the commercial cinema had always employed separate sound films, Walt Disney's 1940 release 'Fantasia' had used a three-channel soundtrack played from separate optical film.[4] Early post-war stereo systems used with Cinerama and some 3D films had used multichannel audio played from a separate magnetic film. Fox had initially intended to use 3 channel stereo from magnetic film for CinemaScope.

However Hazard E. Reeves' sound company had devised a method of coating 35mm stock with magnetic stripes and designed a 3 channel (left, center, right) system based on three .063" (1.6mm) wide stripes, one on each edge of the film outside the perforations, and one between the picture and the perforations in approximately the position of a standard optical soundtrack. Later it was found possible to add a narrower .029" (0.74mm) stripe between the picture and perforations on the other side of the film; this fourth track was used for a surround channel, also sometimes known at the time as an "effects" channel. In order to avoid hiss on the surround/effects channel from distracting the audience the surround speakers were switched on by a 12 kHz tone recorded on the surround track only whilst wanted surround program material was present. [5]

This 4-track magnetic sound system was also used for some non-CinemaScope films, for example Fantasia was re-released in 1956 and 1969 with the original Fantasound track transferred to 4-track magnetic.

Rival processesEdit

CinemaScope itself was a response to early "realism" processes Cinerama and 3-D. Cinerama was relatively unaffected by CinemaScope, as it was a quality-controlled process that played in select venues, similar to the IMAX films of recent years. 3-D was hurt, however, by studio advertising surrounding CinemaScope's promise that it was the "miracle you see without glasses." Technical difficulties in presentation spelled the true end for 3-D, but studio hype was quick to hail it a "victory" for CinemaScope.

In April 1953, a technique simply now known as "wide-screen" appeared and was soon adopted as a standard by all "flat" film productions in the US. In this process, a fully exposed 1.37:1 Academy ratio-area is cropped in the projector to a wide-screen aspect ratio by the use of an aperture plate, also known as a soft matte.

Aware of Fox's upcoming CinemaScope productions, Paramount introduced this technique in March's release of Shane with the 1.66:1 aspect ratio, although the film was not shot with this ratio originally in mind. Universal-International followed suit in May with a 1.85:1 aspect ratio for Thunder Bay. By summer of 1953, Paramount, Universal, MGM, Columbia, and even Fox's B-unit contractors, under the banner of "Panoramic Productions" had switched from filming flat shows in a 1.37:1 format, and used variable flat wide-screen aspect ratios in their filming.

The fundamental technique that CinemaScope utilised was not patentable because the anamorphoscope had been known for centuries. Anamorphosis had been used in visual media such as Hans Holbein's painting, The Ambassadors (1533). Some studios thus sought to develop their own system rather than pay Fox.

In response to the demands for a higher visual resolution spherical widescreen process, Paramount created an optical process, VistaVision, which shot horizontally on the 35 mm film roll, and then printed down to standard 4-perf vertical 35 mm. Thus, a negative with a finer grain was created and release prints had less grain. The first Paramount film in VistaVision was White Christmas. VistaVision died out in the late 1950s, with the introduction of faster film stocks.

RKO used the Superscope process in which the standard 35 mm image was cropped and then optically squeezed in post-production to create an anamorphic image on film.

Another process called Techniscope was developed by Technicolor Inc. in the early 1960s, using normal 35 mm cameras modified for two perforations per (half) frame instead of the regular four and later converted into an anamorphic print. Techniscope was mostly used in Europe, especially with low budget films.

Many European countries and studios used the standard anamorphic process for their wide-screen films, identical in technical specifications to CinemaScope, and renamed to avoid the copyrights of Fox. Some of these include Euroscope, Franscope, and Naturama (the latter used by Republic Pictures). In 1953, Warner Brothers also planned to develop an identical anamorphic process called Warnerscope, but after the premiere of CinemaScope, Warners decided to license it from Fox instead.

Technical difficultiesEdit

Although CinemaScope was capable of producing a 2.66:1 image, the addition of magnetic sound tracks for multi-channel sound reduced this to 2.55:1.

The fact that the image was expanded horizontally when projected meant that there could be visible graininess and brightness problems. To combat this, larger film formats were developed (initially a too-costly 55 mm for Carousel and The King and I) and then abandoned (both films were eventually reduction printed at 35 mm, although the aspect ratio was kept at 2.55:1). Later Fox re-released The King and I in the 65/70 mm format. The initial problems with grain and brightness were eventually reduced thanks to improvements in film stock and lenses.

The CinemaScope lenses were optically flawed, however, by the fixed anamorphic element, which caused the anamorphic effect to gradually drop off as objects approached closer to the lens. The effect was that close-ups would slightly overstretch an actor's face, a problem that soon became referred to as "the mumps". This problem was avoided at first by composing wider shots, but as anamorphic technology lost its novelty, directors and cinematographers sought compositional freedom from these limitations. Issues with the lenses also made it difficult to photograph animation using the CinemaScope process. Nevertheless, many animated short films and a few features were filmed in CinemaScope during the 1950s, including Walt Disney's Lady and the Tramp (1955).


Lens manufacturer Panavision was initially founded in late 1953 as a manufacturer of anamorphic lens adapters for movie projectors screening CinemaScope films, capitalizing on the success of the new anamorphic format and filling in the gap created by Bausch and Lomb's inability to mass produce the needed adapters for movie theaters fast enough. Looking to expand beyond projector lenses, Panavision founder Robert Gottschalk soon improved upon the anamorphic camera lenses by creating a new lens set that included dual rotating anamorphic elements which were interlocked with the lens focus gearing. This innovation allowed the Panavision lenses to keep the plane of focus at a constant anamorphic ratio of 2x, thus avoiding the over-stretched "mumps" effect found in CinemaScope. After screening a demo reel comparing the two systems, many US studios adopted the Panavision anamorphic lenses. The Panavision technique was also considered more attractive to the industry because it was more affordable than CinemaScope and was not owned or licensed-out by a rival studio. By the mid-1960s even Fox had begun to abandon CinemaScope for Panavision (famously at the demand of Frank Sinatra for Von Ryan's Express). Fox eventually capitulated completely to third-party lenses by 1967. Caprice, a spy spoof with Doris Day, was Fox's final film in CinemaScope.[6]

Fox originally intended CinemaScope films to use magnetic stereo sound only, and although in certain areas, such as Los Angeles and New York City, the vast majority of theaters were equipped for 4-track magnetic sound (4-track magnetic sound achieving nearly 90 percent penetration of theaters in the greater Los Angeles area) the owners of many smaller theaters were dissatisfied with contractually having to install expensive three- or four-track magnetic stereo, and because of the technical nature of sound installations, drive-in theaters had trouble presenting stereophonic sound at all. Due to these conflicts, and because other studios were starting to release anamorphic prints with standard optical soundtracks, Fox revoked their policy of stereo-only presentations in March 1954, and added a half-width optical soundtrack, while keeping the magnetic tracks for those theaters that were able to present their films with stereophonic sound. These so-called "mag-optical" prints provided a somewhat sub-standard optical sound and were also expensive to produce. It made little economic sense to supply those theaters which had only mono sound systems with an expensive striped print. Eventually Fox, and others, elected to supply the majority of their prints in standard mono optical sound form, with magnetic striped prints reserved for those theaters capable of playing them.

Magnetic striped prints were expensive to produce; each print cost at least twice as much as a print with a standard optical soundtrack only. Furthermore these striped prints wore out faster than optical prints and caused more problems in use, such as flakes of oxide clogging the replay heads. Due to these problems, and also because many cinemas never installed the necessary playback equipment, magnetic sound prints started to be made in small quantities for "roadshow" screenings only, with the main release using standard mono optical sound prints. As time went by roadshow screenings were increasingly made using 70mm film, and the use of striped 35mm prints declined further. Many CinemaScope films from the 1960s and 1970s were never released in stereo at all. Finally the introduction in 1976 of Dolby Stereo, which provided a similar performance to striped magnetic prints but more reliably and at a far lower cost, caused the 4-track magnetic system to become totally obsolete.

Modern referencesEdit

While the lens system has been retired for decades, Fox has used the trademark in recent years on at least three films: Down with Love, which was shot with Panavision optics but used the credit as a throwback to the films it references, and the Don Bluth films Anastasia and Titan A.E. at Bluth's insistence. Nonetheless, these films are not true CinemaScope as they use modern lenses. CinemaScope's association with anamorphic projection is still so embedded in mass consciousness that all anamorphic prints are now referred to generically as "'Scope" prints.

In the 1963 Jean-Luc Godard film Contempt (Le Mepris), filmmaker Fritz Lang makes a disparaging comment about CinemaScope: "Oh, it wasn't meant for human beings. Just for snakes - and funerals." Ironically, Contempt was shot in CinemaScope.

The 1988 John Waters film Hairspray uses the trademark as a crack on the weight of an overweight teenage girl who wants to star on a TV dance show: "please; this show's not being filmed in CinemaScope!". A 2002 Broadway musical version of Hairspray and a 2007 film adaptation of the Broadway show retain this joke as part of the lyrics of one of the show's songs, "(The Legend of)" Miss Baltimore Crabs".

Community content is available under CC-BY-SA unless otherwise noted.